◎6bar壓縮空氣，**功率下耗氣量600L/min；
The air consumption is 600L / min with 6bar compressed air;
◎單轉速巧妙設計，設計緊湊，重量輕便，速度快捷，便攜好；
Single speed ingenious design, compact design, light weight, fast speed and good portability;
◎功率強大而噪音極低，靜音效果極好，小于80dBA；
The power is strong and the noise is very low, and the mute effect is excellent, less than 80dba;
◎通過氣源處理器調節壓力實現扭矩控制；
The torque control is realized by adjusting the pressure through the air source processor;
◎扭矩精度達±5%，重復精度±1%；
The torque accuracy is ± 5% and the repeatability accuracy is ± 1%;
◎緊湊行星設計，體積小，更大扭矩/重量比，穩定性極好；
Compact planetary design, small volume, higher torque / weight ratio, excellent stability;
◎4位式功率管理控制，扭矩跨度更大；
4-bit power management control, longer torque span;
◎7-葉片式高性能氣動馬達，效率高，使扳手可持續輸出無沖擊扭矩；
7-blade type high-performance pneumatic motor, high efficiency, so that the wrench can continuously output no impact torque;
◎反向偏壓馬達設計提供反轉模式的**功率和扭矩，符合螺栓拆卸時更大扭矩要求；
The reverse bias motor is designed to provide * * power and torque in reverse mode, which can meet the requirements of higher torque during bolt disassembly;
◎單手操作的正/反轉按鈕，觸摸式開關閥；
One hand operated forward / reverse button, touch type on-off valve;
◎杰出率的連續運行性能，可滿足高負荷作業。
Excellent and efficient continuous operation performance, which can meet high load operation.
◎工業級設計，連續使用能力強，完全可滿足生產線裝配/工程施工安裝/設備檢修的需求，從而減輕勞動強度，提高工作效率
Industrial grade design, strong continuous use ability, fully meet the needs of production line assembly / engineering construction installation / equipment maintenance, so as to reduce labor intensity and improve work efficiency
